Newer
Older
NetAddr-IP / Lite / Util / Changes
@Michael Robinton Michael Robinton on 21 Oct 2014 8 KB Import of MIKER/NetAddr-IP-4.065 from CPAN.
  1. 1.48 Tue Oct 2 12:36:11 PDT 2012
  2. correct incorrect format for IPv6 embedded IPv4 addresses
  3. in InetBase v0.8
  4.  
  5. 1.47 Fri Aug 10 11:46:18 PDT 2012
  6. correct typo in documentation POD
  7. Thanks to Gregor Herrmann, Debian Perl Group
  8.  
  9. Updated GPL text and address
  10.  
  11. 1.46 Fri Nov 11 19:23:11 PST 2011
  12. update documentation in InetBase v0.06
  13.  
  14. 1.45 Fri Nov 11 13:20:32 PST 2011
  15. break out the code in InetBase v0.05 that expands short IPv4
  16. addresses into dotquad format to account for broken BSD
  17. implementations of inet_aton and gethostbyname that do
  18. not recognize the short format. EXPORT this as sub 'fillIPv4'
  19.  
  20. in Util.pm, add 'fillIPv4' to calls to gethostbyname to
  21. work around broken inet_aton and gethostbyname implementations
  22. in certain BSD implementations
  23.  
  24. 1.44 Wed Nov 2 19:15:31 PDT 2011
  25. improve inet_aton in InetBase v0.04 to overcome broken
  26. gethostbyname found in NetBSD and OpenBSD
  27.  
  28. 1.43 Mon Oct 24 13:25:09 PDT 2011
  29. remove reference to Config{osname} in InetBase.pm v0.03
  30.  
  31. 1.42 Fri Oct 21 10:34:46 PDT 2011
  32. Socket6 prior to version 0.23 does not have AF_INET6 in the
  33. EXPORT_OK array, modify InetBase.pm v0.02 to work around this.
  34.  
  35. 1.41 Sat Oct 15 17:26:21 PDT 2011
  36. add inet_pton, inet_ntop, AF_INET, AF_INET6
  37.  
  38. modify inet_n2dx and inet_n2ad to
  39. recognize the new 128 bit IPv4 format
  40. ::FFFF:FFFF:0:0
  41.  
  42. replace isIPv4 with a pure perl version for portablity
  43.  
  44. split the following into NetAddr::IP::InetBase v0.01
  45. to provide better long term support for IPv6
  46. inet_aton
  47. inet_ntoa
  48. ipv6_aton
  49. ipv6_n2x
  50. ipv6_n2d
  51. inet_any2n
  52. inet_n2dx
  53. inet_n2ad
  54. inet_ntop
  55. inet_pton
  56. packzeros
  57. isIPv4
  58. isNewIPv4
  59. isAnyIPv4
  60. AF_INET
  61. AF_INET6
  62.  
  63. 1.40 Sat Oct 8 01:33:44 PDT 2011
  64. remove debug print statement from Util.pm
  65.  
  66. 1.39 Thu Oct 6 23:41:42 PDT 2011
  67. really correct missing internal reference
  68.  
  69. 1.38 Thu Oct 6 20:20:33 PDT 2011
  70. corrected missing internal reference to inet_4map6
  71.  
  72. 1.37 Thu Oct 6 18:23:04 PDT 2011
  73. addid isAnyIPv4, isNewIPv4, inet_4map6
  74. revised naip_gethostbyname
  75. to conform to Perl's gethostbyname output
  76.  
  77. 1.36 Sat Feb 19 10:04:00 PST 2011
  78. correction to use of package lexicals
  79.  
  80. thanks to mishikal@yahoo.com for spotting the bug and to
  81. Mark Martinec mark.martinec+ama...@ijs.si for the solution.
  82.  
  83. 1.35 Tue Nov 16 16:28:37 PST 2010
  84. naip_gethostbyname modified to return undef instead of
  85. 0 (zero) on failure
  86.  
  87. thanks to Terry Cassidy enaudishaylee@tc17.com for the bug report
  88.  
  89. move sub's ipv6_n2d and ipv6_n2x to non-autosplit portion
  90. of module to eliminate warnings during autosplit of "our" variables
  91.  
  92. thanks to Nicholas Bamber <nicholas@periapt.co.uk>
  93. Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=517361
  94.  
  95. 1.34 Wed Sep 29 10:32:50 PDT 2010
  96. Conditionalize import of AF_INET6 in Util.pm
  97. NetAddr::IP::UtilPolluted
  98.  
  99. 1.33 Tue Sep 21 17:50:50 PDT 2010
  100. Add UtilPolluted namespace to contain name space pollution
  101. created by "use Socket" when invoking Socket6.
  102.  
  103. 1.32 Wed May 12 14:18:20 PDT 2010
  104. In Util.xs,
  105. changed netswap() to postincrement
  106. *a++ = to *a and added increment after save to mollify some
  107. picky compilers that return possible undefined behavior.
  108.  
  109. changed type of _128x10 to 'void'
  110.  
  111. 1.31 Tue Jun 9 10:31:11 PDT 2009
  112. ferret out shell value for Makefile.PL when calling
  113. ./configure for systems where the 'x' bit gets lost
  114. due to bug in Archive::Tar
  115.  
  116. 1.30 Sat Mar 7 16:35:33 PST 2009
  117. make the compiler test check the environment for
  118. CC before using Perl's default compiler
  119.  
  120. 1.29 Sat Mar 7 16:15:18 PST 2009
  121. revised compiler test in Makefile.PL for Util v1.29
  122. to accomodate picky Solaris "cc"
  123.  
  124. 1.28 Wed Dec 17 14:14:06 PST 2008
  125. set uninitialized "carry" in XS bin2bcd to zero
  126.  
  127. 1.27 Tue Dec 9 12:00:08 PST 2008
  128. revised UtilPP v1.7 to work around perl 5.8.4
  129. failures with certain @_ operations of goto &sub...
  130. see perl bug [ 23429]. Unfortunately, perl-5.8.4 is
  131. the distribution of choice for many solaris boxes
  132.  
  133. 1.26 Fri Nov 28 23:19:01 PST 2008
  134. revised XS code to be full re-entrant... thread safe.
  135. removed all traces of mutex locks
  136. removed function 'threads' here an in UtilPP v1.6
  137.  
  138. 1.25 Tue Nov 18 19:08:56 PST 2008
  139. correct documentation error in Util_PP v1.5
  140.  
  141. add threads reporting to Util.xs and UtilPP
  142.  
  143. added what is hopefully thread safe operation via
  144. serialization. Must be invoked by "--with-threads"
  145.  
  146. 1.24 Wed Nov 5 18:13:20 PST 2008
  147. Clean up Makefile.PL to check actual required link
  148. libraries against the perl build for consistency
  149.  
  150. 1.23 Sun Nov 2 10:10:38 PST 2008
  151. add missing headers in configure and localconf.h for Solaris inet_xton
  152. thanks to Karl Bunch <karl@digilink.net> for spotting the bug.
  153.  
  154. 1.22 Wed Oct 22 14:54:12 PDT 2008
  155. eliminated dependence on PL_sawampersand
  156. thanks to Mark Martinec <Mark.Martinec@ijs.si>
  157. for spotting this and submitting a patch.
  158.  
  159. force -noxs mode for Win32
  160.  
  161. use autoconf to configure 'C' build
  162.  
  163. 1.21 Thu Oct 16 19:35:33 PDT 2008
  164. again... clear build bug for Win32
  165. and lets get the version number right since it appears
  166. that it was up-rev'd at some point to 1.xx
  167.  
  168. 0.20 Mon Oct 6 13:07:34 PDT 2008
  169. clear build bug for Win32
  170.  
  171. 0.19 Sat Sep 27 13:36:58 PDT 2008
  172. updated test for ENDIANess in siteconf
  173.  
  174. add test in inet_aton to detect overange IP dot quad values
  175. missed by some broken Socket implementations
  176. i.e. 256.1.1.1
  177.  
  178. 0.18 Sun Aug 6 10:48:25 PDT 2006
  179. correct shiftleft documentation
  180. correct mask4to6 documentation
  181.  
  182. 0.17 Thu Jul 6 10:46:48 PDT 2006
  183. update 'siteconf line 1608' to fix empty variable in inet_aton test
  184. update 'siteconf line 1636' to fix empty variable in inet_pton test
  185. add missing colon at t/notcontiguous.t line 66
  186.  
  187. 0.16 Sun Jun 25 16:13:00 PDT 2006
  188. fixed ->new() issues with long digit strings ->new('::fffff')
  189. and non hex digits ->new('::foo').
  190. Thanks to Radoslaw Zielinski <radek42@gmail.com>
  191. for spotting those bugs
  192.  
  193. 0.15 Tue Jun 13 14:42:34 PDT 2006
  194. UtilPP.pm v0.07 & Util.xs 'shiftleft' so that the original
  195. argument is returned when the shift count is '0' or missing
  196.  
  197. 0.14 Tue Jun 6 08:37:01 PDT 2006
  198. add logic to check LIBS => [-lfiles]
  199. individually. ExtUtils::xxx does a bad job and
  200. leaves libs that do not exist in the list
  201. which causes 'siteconf' to blow up on missing libs
  202. on perl 5.053 (and probably others)
  203.  
  204. 0.13 Tue Jun 6 08:33:11 PDT 2006
  205. added to xs file, 'hopefully' to allow build on windoze platforms
  206.  
  207. 0.12 Tue Jun 6 08:21:12 PDT 2006
  208. add logic to makefile so 'siteconfig' and C libs
  209. are not used in PurePerl mode
  210.  
  211. 0.11 Mon Jun 5 14:45:09 PDT 2006
  212. fix Sparc problems
  213. 1) add workaround for OS's that do not have inet_aton
  214.  
  215. 2) add workaround for compilers that do not understand
  216. #if MACRO1 == MACRO2
  217.  
  218. 0.10 Sat Jun 3 19:07:51 PDT 2006
  219. add site configuration to supply u_intxx_t vars
  220. for Sun OS and others that don't have them
  221.  
  222. 0.09 Sun May 7 18:06:43 PDT 2006
  223. UtilPP.pm v0.06, removed unnecessary pack(unpack) sequences
  224. to speed up ipv4->6, ipv6->4 conversions
  225.  
  226. 0.08 Wed Apr 26 18:33:12 PDT 2006
  227. correct documentation error
  228. add ipv6to4
  229.  
  230. 0.07 Sun Apr 23 16:11:56 PDT 2006
  231. correct reporting error in UtilPP v0.04 for
  232. incorrect argument length in ipv4 -> 6 conversions
  233.  
  234. add conditional netaddr conversion functions
  235. ipanyto6, maskanyto6 to Util.xs and UtilPP v0.05
  236.  
  237. 0.06 Tue Apr 18 16:50:53 PDT 2006
  238. add ipv4to6, mask4to6 to Util.pm and UtilPP.pm v0.03
  239.  
  240. 0.05 Sat Apr 15 15:48:17 PDT 2006
  241. Fixed some typo's in Makefile.PL that
  242. failed to update README during build
  243.  
  244. 0.04 Wed Apr 12 15:43:33 PDT 2006
  245. add Util_IS.pm to guarantee that the XS lib is not
  246. loaded if a previous incarnation of the same version
  247. has previously been installed on the system and the
  248. module is built with -noxs
  249.  
  250. 0.03 Tue Apr 4 21:55:35 PDT 2006
  251. update minisocket to perl-5.9.3, add header
  252. file for backwards compatibility
  253.  
  254. add function 'notcontiguous' to return cidr size
  255. and check for spurious bits in the network mask
  256.  
  257. 0.02 Fri Mar 31 12:44:15 PST 2006
  258. added test for illegal characters to ipv6_aton
  259.  
  260. added UtilPP for Pure Perl functionality for the
  261. WinTel folks that don't have gcc on their systems
  262.  
  263. 0.01 Tue Mar 28 16:42:44 PST 2006
  264. initial release
  265.