Revision history for Perl extension NetAddr::IP::Lite
 
1.28  Wed Apr  6 11:31:19 PDT 2011
	Update documentation on the use of "adding constants
	to an IP address".
 
1.27  Tue Mar 22 15:26:02 PDT 2011
	Update Lite.pm to encompass treatment of /31 and /127 
	point-to-point networks as described in RFC 3021
 
	NOTE: for /31's and /127's
	this changes the behavior of the following methods:
		first	returns the "network" address
		last	returns the "broadcast" address
		nth	index 0 returns "network" addr instead of undef
		nth	index 1 returns "broadcast" addr instead of undef
		num	returns 2 instead of 0 (zero)
 
	"old_nth" behavior is unchanged
 
	Thanks to Todd Caine todd.caine@gmail.com for pointing this out.
 
1.26  Tue Mar  8 15:18:16 PST 2011
	Updated "sub num" to support usable IP ranges greater than 2**32
 
	Thanks to Jan Ploski jan@plosquare.com for finding this bug
 
1.25  Sat Feb 19 10:04:00 PST 2011
	correction to use of Util.pm package lexicals
 
	thanks to mishikal@yahoo.com for spotting the bug and to
	Mark Martinec mark.martinec+ama...@ijs.si for the solution.
 
1.24  Fri Dec 17 17:47:47 PST 2010
	Modify subs "new" and "new6" to accomodate
	Cisco mask syntax that uses space instead of "/" for a separator
	This eliminates the need for "new_cis" and "newcis6" which are now
	deprecated.
 
	Modify t/v4-cnew.t and add t/v6-cnew.t to test the above
 
1.23  Fri Nov 19 10:48:01 PST 2010
	add :upper and :lower to Lite.pm v1.23
	add comments about rfc5952 requirement for lowercase ipV6 notation
	add test for :lower
 
1.22  Tue Nov 16 16:28:37 PST 2010
	update new6 to properly classify short ipv4 notation
	i.e. 127/8 with test for ":" rather than match for \d.\d.\d.\d
	
	thanks to Steve Huff (SHUFF) * shuff@cpan.org for 
	spotting that bug.
 
	update t/v4-new.t for deprecated array syntax in perl 5.13
	was:	qw(...stuff...)
	is:	(qw(...stuff...))
 
	thanks to Todd Rinaldo <toddr@cpan.org> for reporting this
 
1.21  Thu Oct 28 14:26:19 PDT 2010
	fix bug where new6 improperly assigns the mask value 
	for and ipv4 address in 32 bit space instead of 128 bit space
 
	Thanks to Mark Martinec and Steve Huff (SHUFF) * shuff@cpan.org
	for spotting and replicating that bug
 
	added new_cis and new_cis6 to Lite.pm v1.21 to accomodate
	Cisco syntax that has IP and MASK seperated by a space.
 
	Updated typo in documentation that left out example
	print new6 stuff
 
1.20  Mon Oct 25 16:22:01 PDT 2010
	Updated _xnew to properly handle ipV6 notation of the form
	xxxx:xxxx:xxxx:xxxx:xxxx:xxxx, DDD
 
	Thanks to Dusty Mabe <Dusty.Mabe@tekelec.com> for spotting this bug
 
1.19  Wed Sep 29 10:32:50 PDT 2010
	Conditionalize import of AF_INET6 in Util.pm
	NetAddr::IP::UtilPolluted
 
1.18  Wed Sep 22 13:39:08 PDT 2010
	Added overload => 'ne' and '!=' to Lite.pm
 
1.17  Tue Sep 21 17:50:50 PDT 2010
	Pull Socket6 stuff out of Lite and put into
	NetAddr::IP::Util.pm in its own namespace
 
1.16  Wed Aug 11 12:45:49 PDT 2010
	When using Socket6, pull in missing symbol PF_INET6, which may
	or may not be present, from Socket.
 
1.15  Tue Jul 20 15:32:23 PDT 2010
	Resolve named hosts using gethostbyname, followed by gethostbyname6
	to determine whether to set ipV6 flag
 
	Thanks to Dusty Mabe <Dusty.Mabe@tekelec.com> for spotting this bug
 
1.14  Thu Jul  8 18:17:38 PDT 2010
	added support for the sub "new" to resolve host6 names
	if the OPTIONAL perl Socket6 module is available
 
1.13  Tue Dec  9 16:00:35 PST 2008
	added missing regexp to classify arguments as BCD numbers,
	apparently this has been missing from NetAddr::IP::Lite 
	since the first release. 
	Thanks to Carlos Vicente cvicente@cpan.org for reporting this bug.
 
	revised UtilPP v1.7 to work around perl 5.8.4
	failures with certain @_ operations of goto &sub...
	see perl bug [ 23429]. Unfortunately, perl-5.8.4 is
	the distribution of choice for many solaris boxes
 
1.12  Sun Nov 23 19:32:59 PST 2008
	repaired missing sub Zeros
 
	added minus (-) overloading to allow the subtraction
	of two NetAddr::IP objects to get the difference between
	the object->{addr}'s as a numeric value
	Thanks to Rob Riepel <riepel@networking.Stanford.EDU>
	for the initial code and inspiration for this enhancement
 
1.11  Sat Nov  1 15:13:48 PST 2008
	add test for characters not allowed by rfc952 before
	the call to gethostbyname in sub new() for those people
	that insist on using deprecated functionality :aton
	and OS's that fail to notice calls to gethostbyname
	with binary arguments
 
1.10  Wed Oct 22 14:54:12 PDT 2008
	add new no octal method for improperly formatted ipV4 addresses
 
	In Util.pm v1.22, eliminated dependence on PL_sawampersand
	thanks to Mark Martinec <Mark.Martinec@ijs.si>
	for spotting this and submitting a patch.
 
	In Util.pm v1.22, force -noxs mode for Win32
 
	In Util.pm v1.22, use autoconf to configure 'C' build
 
1.09  Thu Oct 16 19:35:33 PDT 2008
	again... clear build bug for Win32 in Util.pm v 1.21
 
1.08  Sat Sep 27 12:27:28 PDT 2008
    in Util v0.19
	updated test for ENDIANess in siteconf
 
	add test in inet_aton to detect overange IP dot quad values
	missed by some broken Socket implementations
	i.e. 256.1.1.1
 
1.07  Tue Sep  2 19:09:57 PDT 2008
	in the off chance that NetAddr::IP::Lite objects are created
	and the caller later loads NetAddr::IP and expects to use
	those objects, let the AUTOLOAD routine find and redirect
	NetAddr::IP::Lite method and subroutine calls to NetAddr::IP.
 
	updated t/v4-wnew.t so that non-existent
	domains are "really" not there
 
1.06  Sat Jun  7 12:57:18 PDT 2008
	add method "new_from_aton" and related documentation
 
	comparisons of the form <, >, <=, >=
		10.0.0.0/24 {operator} 10.0.0.0/16
	return now return the comparison of the cidr value
	when the address portion is equal.
NOTE:	this comparison returns the comparison of the NUMERIC
	value of the CIDR. This produces the counter intuitive result
	that /24 > /16. There is logic to this, really! For proper
	operation of commands like "Compact" and "Coalesce", lists of
	netaddr objects must sort in ascending order. However, this
	conflicts with the requirement for larger netblocks to sort
	FIRST so as to include smaller ones. This logic extends to
	any requirement for a sort of netaddr objects. It should be
	further noted that the mixing of netaddr objects with varying
	IP addresses and CIDR allocations can lead to unexpected
	results since the comparisons done first on the IP portion
	and then on the CIDR portion. The documentation has been
	updated appropriately.
	Thanks to Peter DeVries for spotting this discrepancy
 
1.05  undocumented
1.04  undocumented
 
1.03  Sun Aug  6 10:48:25 PDT 2006
	update Util.pm v0.18 documentation
 
1.02  Fri Aug  4 14:14:16 PDT 2006
	$isV6 global converted to a lexical variable within sub "_xnew"
	$Class global removed and replaced by calls to UNIVERSAL::isa
	Thanks to julian@mehnle.net for spotting problems related to
	using the Lite.pm with mod_perl
 
1.01  Thu Jul  6 10:46:48 PDT 2006
	update v4-wnew.t to warn user of possible long wait
	update Util.pm v0.17 -- see Changes in that distro
 
1.00  Mon Jun 26 13:34:00 PDT 2006
	changed behavior of ->nth and ->num
	to 'exactly' conform to the documentation
 
	add :old_nth tag to preserve old behavior
	and update tests to check both
 
0.12  Sun Jun 25 16:13:00 PDT 2006
	imported missing 'bcd2bin'
 
	fixed Util->new() issues with long digit strings
	->new('::fffff') and non hex digits ->new('::foo').
	Thanks to Radoslaw Zielinski <radek42@gmail.com>
	for spotting these 3 bugs
 
0.11  Wed Jun 14 14:53:21 PDT 2006
	add 'sub new6' and related functionality to methods
	that print or return v4/6 information or text.
 
	add $self->{isv6} flag for hint to ipV6 status
 
	corrected bug in sub num that miscalculated the number
	of IP's in a net for /31 /32
 
0.10  Tue Jun 13 14:07:46 PDT 2006
	bring 'sub new' into full compliance with NetAddr::IP,
	correct compatibility with for ==,>,<,=>,>=,<=>,cmp
	and update documentation to reflect actual implementation
 
	add 'copy' function that return a completely new object
 
	export (Zero Ones V4mask V4net)
 
	update Util.pm v0.15 so shiftleft returns original
	argument when the shift count is zero or undefined
 
0.09  Tue Jun  6 08:37:01 PDT 2006
	update Util/Makefile.PM to check for link libraries
	that ExtUtils::MakeMaker does not find properly
 
	remove 'use warnings' from Lite.pm for backwards
	compatibility with older perl versions
 
0.08  Tue Jun  6 08:33:11 PDT 2006
	update Util.xs for build on windoze
 
0.07  Tue Jun  6 08:21:12 PDT 2006
	update NetAddr::IP::Util to v0.12
 
0.06  Mon Jun  5 21:34:28 PDT 2006
	fix Sparc problems in Util v0.11
    1)	add workaround for OS's that do not have inet_aton
 
    2)	add workaround for compilers that do not understand
	#if MACRO1 == MACRO2
 
0.05  Sun May  7 18:06:43 PDT 2006
	updated UtilPP.pm v0.06 to remove unnecessary pack(unpack) sequences
	to speed up ipv6->4, ipv4->6 conversions
 
0.04  Fri Apr 28 17:36:28 PDT 2006
	left Util/Makefile.pl out of the top level distro
 
0.03  Fri Apr 28 17:26:51 PDT 2006
	oops! left prerequisite Util 0.08 in the Makefile
	when it is include in this distro
 
0.02  Fri Apr 28 16:11:00 PDT 2006
	update Lite.pm to accept ->new('addr/mask')
	where addr and mask are both in IP address format
 
	add test for above t/netaddr.t
 
0.01  Wed Apr 26 19:03:18 PDT 2006
	initial release